Perfect Sticker Placement on Clear Mount Stamps

Do you hate applying stickers to your clear mount stamps?  There is a BETTER way (sorry Stampin' Up!) to apply perfect stickers EVERY TIME.  Follow these easy steps for perfect placement of stickers.

Step 1:  DO NOT remove stamp from package

Step 2:  Remove liner from back of stamp 

Step 3:  Remove sticker from sheet but do not remove the liner that covers the adhesive. 

Step 4:  Remove half of the liner

Step 5:  Place sticker on the foam backing of the stamp, only applying pressure to the part that DOES NOT have adhesive exposed.  Once in place, apply pressure to the rest of the sticker.

 Step 6:  Remove remaining liner and apply pressure to adhere the rest of the sticker.

 

THERE YOU HAVE IT - SIX STEPS TO PERFECT PLACEMENT OF STICKERS! 

Using Card Maps Series II

Stampin' Up! Products

• Calypso Coral cardstock
• Card base measures 4 1/4" x 5 1/2"
• Scrap for bird
• Old Olive cardstock
• Card layer measures 3 7/8" x 5 1/8"
• Cut leaves from inside this piece
• Card layer measures 1 1/4" x 4 1/2"
• Card layer measures 1 1/4" x 3 3/4"
• Card layer measures 3" x 2 1/2"
• Very Vanilla cardstock
• Card layer measures 3 3/4" x 5"
• Pretty Petals Designer Series Paper
• Card layer measures 1 1/8" x 4 1/8"
• Card layer measures 1 1/8" x 3 5/8"
• Card layer measures 2 7/8" x 2 3/8'
• Express Yourself and Language of Friendship stamp sets
• Basic Black ink
• Bird Builder hand punch
• Foliage die (non SU)
• Black Jewels
• Dimensionals

Using Card Maps Series

On June 8 I will begin a new blog series titled "Using Card Maps".  On March 21, I posted the first in a long series of creating cards using card maps.

If you are having difficulty getting inspired, look for card maps and don't be afraid to experiment.  It is only paper (GASP).  I have a Pinterest Board called Card Maps, click HERE.

This is how I begin - I have a envelope filled with blank cardstock in an array of sizes.  I used inexpensive cardstock and each piece of paper has the measurement written on them. 

 

 

I begin with a blank canvas - THE CARD BASE.  I pull out different sizes to see which fits best for the design.

 

I then begin to start layering using pieces from my envelope.

 

 

My Paper Pumpkin Craft Kit for ONLY $5

You read the blog title correctly, My Paper Pumpkin is offering a craft kit for new subscribers.

This amazing offer starts Thursday, June 9 at 5:00 PM (MT) and ends Friday, June 10 at 11:50 PM (MT).

Technically that’s a little more than one day, but it will go by in a blink!  Everyone take advantage of this offer to grab their first Paper Pumpkin kit for practically pennies.

What is My Paper Pumpkin?  A craft kit in the mail every month.  There is no obligation, cancel ANYTIME.  Check out past kits HERE.  Everything you need to complete the kit is included.  Purchase this kit for a rainy day!

For a direct link, click HERE.

If you have any questions, please EMAIL me.

Beauty in Simplicity

Stampin' Up! Products

• Very Vanilla cardstock
• Card base measures 8 1/2" x 5 1/2"
• Run through Circle Card Thinlit
• Score at 5 7/8"
• Circle is 2 1/8"
• Inside card layer measures 2 3/8" x 5"
• Calypso Coral cardstock
• Scrap for flowers
• Punch 6, layer with Dimensionals
• Mint Macaron cardstock
• Outside card layer measures 2 3/8" x 5 1/4"
• Cut fern from this piece
• Inside card layer measures 2 5/8" x 5 1/4"
• Circle is 2 3/8"
• Strip measures 1/2" x 5 1/4"
• Pretty Petals Designer Series Paper
• Card layer measures 2 1/8" x 5"
• Strip measures 1/4" x 5"
• Hey You stamp set
• Basic Black ink
• Circle Card Thinlits
• Botanical Builder Framelits
• Itty Bitty Accents hand punch
• Circle dies 2 1/8" and 2 3/8"
• Basic Pearl Jewels
• Dimensionals

There are many YouTube videos on how to create the extended flap. THIS is one of them.

Changing it Up - May 2016 Paper Pumpkin

It wasn't my intent to precision cut around the die cut lettering.  I should have made it flagged on the right side, lesson learned. Can you even tell that there is beautiful patterned paper underneath the flower?  This card only took 90 minutes to create, the opening bid starts at $9.99!


Stampin' Up! Products

• May 2016 My Paper Pumpkin
• Whisper White card base measures 4 1/4" x 5 1/2"
• Blushing Bride cardstock
• Layer under "Happy" measures 4 1/4" x 1 3/16"
• Scrap for flowers
• Mossy Meadow cardstock
• Card layer measures 4 1/8" x 5 3/8"
• Card layer measures 4 1/4" x 1 1/4"
• Scraps for ferns
• Pool Party cardstock
• Scrap for flowers
• Whisper White cardstock
• Banner measures 2 5/8" x 5/8"
• Scrap for flower center
• Birthday Bouquet Designer Series Paper
• Card layer measures 4 1/4" x 1 1/8"
• Many Manly Occasions stamp set
• Always Artichoke ink
• Botanical Builder Framelits
• Itty Bitty Accents punch
• Corner leaves punch (non SU)
• Always Artichoke Candy Dot
• Basic Pearl Jewels
• Dimensionals

Color Me Happy

I received a Stampin' Up! order from a new customer, Mary W. 

Mary, if you are a blog follower....

THANK YOU!

YOU MADE MY DAY!
 

Masculine Create A Card Workshop

Crafts by Beth
Create A Card Workshop - Jasper, AL
Father's Day

Saturday, June 4   10:00 - 12:00
OR
Monday, June 6 10:00 - 12:00
OR
Monday, June 6  6:15 - 8:15

 
Three cards for $10.00
Select from many sentiments

EMAIL to reserve your spot, class size is limited
 

 

 

May 2016 Paper Pumpkin All Dolled Up

My Paper Pumpkin - May 2016

• Card base
• Pumpkin Pie corrugated cardstock
• Pool Party Happy die cut *
• Dyed with Night of Navy ink
• Many Manly Occasions stamp set
• Pool Party star embellishments

Not included in kit

• Night of Navy and Pumpkin Pie cardstock
• Scraps for butterflies
• Butterfly die (non SU)
• Dimensionals
• Basic Pearl Jewel

If you haven't seen my post on applying die cut lettering in a straight line, click HERE for tutorial.

* Trim die cut, remove white top layer, leaving die cut intact.  Sponge die cut lettering with ink.

May 2016 Paper Pumpkin Botanical Gardens

Stampin' Up! Products

• May 2016 Paper Pumpkin
• Whisper White card base measures 4 1/4" x 5 1/2"
• Cajun Craze cardstock
• Card layer measures 4 1/4" x 1 1/4"
• Scrap for flower
• Hello Honey cardstock
• Scrap for flower center
• Mint Macaron cardstock
• Layer inside measures 4" x 5 1/4"
• Mossy Meadow cardstock
• Scrap for fern
• Botanical Gardens Designer Series Paper
• Card layer measures 4 1/4" x 1 1/8"
• Stamped flower centers
• Botanical Blooms stamp set
• Cajun Craze ink
• Botanical Builder Framelits
• Basic Pearl Jewel dyed brown
• Dimensionals
• Fine Tip Glue Pen *

* After using "many" mini glue dots to adhere the inside paper, I think our Fine Tip Glue Pen is more economical.

May 2016 Paper Pumpkin Stepped Up

My Paper Pumpkin - May 2016

• Card base
• Pumpkin Pie corrugated cardstock
• Pool Party Happy die cut
• Many Manly Occasions stamp set

Not included in kit

• Night of Navy, Old Olive and Pumpkin Pie cardstock
• Scraps for fern, flower and flower center
• Night of Navy ink
• Botanical Builder Framelits
• Dimensionals
• Basic Pearl Jewel

Keeping it straight...Part II

You read my previous post HERE about keeping it straight.  Here is yet another illustration on "Keeping it Straight".

Keeping it Straight

Refer to early posting of pictures for the next 3 steps

Start by cutting around the outside of your die cut word. 

Carefully remove the top white layer; leaving the die cut on the backing.  Also remove the spaces inside the letters.

Turn over and carefully pull the backing up, only allowing the backing to release from the die cut word.  Create a straight crease in the backing.

Use a ruler to create a straight line on card.

Use the ruler as a guide, press down on the ENTIRE exposed lettering.  Apply good pressure to allow lettering full contact with the paper.



Take the backing from the top and slowly pull and remove.  Hold down the bottom letters as your pull away.

And there you have it - a straight application

My Paper Pumpkin Alternative

• My Paper Pumpkin - May 2016
• Card base
• Pumpkin Pie corrugated cardstock
• Pool Party Happy die cut
• Many Manly Occasions stamp set
• Not included in kit
• Old Olive and Pumpkin Pie cardstock
• Scraps for leaves and flowers
• Pumpkin Pie ink
• Bird Builder and Itty Bitty Accents hand punches
• Dimensionals
• Basic Pearl Jewels
• Fine Tip Glue

Keeping it straight....

... I am a "little" OCD and I tend to always; ok, I always like straight lines.  Even when it comes to creating cards.

I put myself to a challenge to find the BEST way to apply the "Happy" adhesive die cut that came in May, 2016 My Paper Pumpkin Kit.  Congratulations to every subscriber, this month's kit is AWESOME!  Don't miss out on next month's kit in the mail, EMAIL me!

Keeping it Straight

Start by cutting around the outside of your die cut word. 



Carefully remove the top white layer; leaving the die cut on the backing.  Also remove the spaces inside the letters.

Tip:  Use a piercing tool and pull back the top white layer.

Turn over and carefully pull the backing up, only allowing the backing to release from the die cut word.  Create a straight crease in the backing.

Turn over and place on card.

Adjust to your satisfaction and press down on the ENTIRE exposed lettering.  Apply good pressure to allow lettering full contact with the paper.

Take the backing from the top and slowly pull and remove.  Hold down the bottom letters as your pull away.

And there you have it - a straight application

(Now if only I could take better pictures.)

The Final My Paper Pumpkin Alternative

• My Paper Pumpkin - May 2016
• Card base
• Pumpkin Pie corrugated cardstock
• Pool Party Happy die cut
• Many Manly Occasions stamp set
• Star embellishment
• Not included in kit
• Basic Black, Pool Party and Pumpkin Pie cardstock
• Scraps for balloons, balloon tails and bow
• Balloon Celebration stamp set
• Pool Party and Pumpkin Pie inks
• Mini Treat Bag Thinlits (bow)
• Balloon Bouquet and Bird Builder (for balloon tails) hand punches
• Dimensionals
• Fine Tip Glue

It's My Party

Stampin' Up! Products

• Whisper White cardstock
• Card base measures 4" x 5 1/2"
• Basic Black cardstock
• Scrap for balloon
• Melon Mambo textured cardstock
• Scrap for balloon
• Silver Glimmer Paper
• Scrap for balloon
• Everyday Chic Designer Series Paper
• Card layer measures 4" x 1 1/4"
• It's My Party Designer Series Paper
• Card layer measures 4" x 3 1/8"
• Basic Black and Melon Mambo Stampin' Write Markers
• Balloon Celebration and Perfect Pairings stamp sets
• Balloon Bouquet hand punch

For the Love of Sweet Pea

I can't believe I still have so much of the Sweet Pea Designer Series Paper!

Stampin' Up! Products

• Whisper White cardstock
• Card base measures 4 1/4" x 5 1/2"
• Card layer measures 3" x 4 1/4"
• Old Olive cardstock
• Card layer measures 3 1/4" x 4 1/2"
• Sweet Pea Designer Series Paper
• Card layer measures 4" x 5 1/4
• Strip measures 3 1/2" x 1 1/4"
• Scrap for bow
• Wetlands and Wild about Flowers stamp sets
• Basic Black, Old Olive and Tangerine Tango inks
• Bow Builder punch
• Dimensionals

This is another "This is why I blog" post

A comment from a blog follower; Sheila you made me smile. I do not earn money posting on my blog and I have never had a new customer purchase Stampin' Up! as a result of viewing my blog.  I just do it to inspire others.  

Hello Beth, I love your card. I am partial to butterflies and was looking for a layout different than the standard rectangle for a thank you card I need to make. You always have something special for this newbie to case! And I thank you. Love your colour choice as well. I visit your blog every day, don't ever stop creating you are such an inspiration. Now I have to go make this card. Have a wonderful day. Sheila 

Buttons, buttons, who has too many buttons?

I DO!

I purchased buttons thinking I would put them on cards.  I did a few, but mailing isn't easy and costs more than one stamp.

I searched on Pinterest and found an idea - voilà button flowers!

Now, what do I do with them?  Decorate a plain tissue holder into a work of art!



Butterfly in a Garden

Stampin' Up! Products

• Whisper White cardstock
• Card base measures 4 1/4" x 5 1/2"
• Cameo Coral cardstock
• Card layer measures 3 7/8" x 5 1/8"
• Gumball Green cardstock
• Strip measures 3/4" x 3 7/8" before using punch
• Scrap for butterfly
• So Saffron cardstock
• Strip measures 3 7/8" x 3/8"
• Scrap for butterfly
• Garden Walk pattern cardstock (non SU)
• Card layer measures 3 3/8" x 3 1/2"
• Cut panels (3 3/8" along top of trimmer) 1 1/8" x 3 1/2"
• Keep them in order
• Gifts of Kindness stamp set
• Basic Black ink
• Butterfly die (non SU)
• Scallop Edge Border punch
• Basic Pearl Jewel
• Dimensionals

Guy Greetings

Stampin' Up! Products

• Chocolate Chip cardstock
• Card base measures 4 1/4" x 5 1/2"
• Card layer measures 3 1/2" x 4 1/4"
• Cut 2 7/8" circle from this piece
• Whisper White cardstock
• Card layer measures 3 1/4" x 4"
• Circle measures 2 5/8" x 2 5/8"
• Sweet Pea Designer Series Paper
• Card layer measures 4" x 5 1/4"
• Guy Greetings stamp set
• Chocolate Chip ink
• Chocolate Chip 1/4" grosgrain ribbon
• Circle dies (non SU)

For a stay put bow, cut card bases 4 1/4" x 11" and score at 5 1/2".  Check out THIS awesome YouTube video.  Please take the time to leave a comment on Melissa's video.

Sometimes it is complicated.....

....when you need to make three panels that are the same size and difference apart within a space such as a card layer.  I rack my brain and of course, cut incorrectly.  I saw a layout that I loved and now I have a headache!  Math wasn't my best subject.

I think the headache was worth it.....

Stampin' Up! Products

• Very Vanilla cardstock
• Card base measures 4 1/4" x 5 1/2"
• Scrap for 2 3/8" circle
• Scrap for 1 1/4" circle (sentiment)
• Scrap for flower center
• Baja Breeze cardstock
• Card layer measures 3 7/8" x 5 1/4"
• Strip measures 3 7/8" x 3/8"
• Scrap for 2 5/8" circle
• Punch out 1 3/8" circle from the center
• Cameo Coral cardstock
• Card layer measures 3 7/8" x 5/8"
• Scrap for flower
• Wild Wasabi cardstock
• Strip measures 3/4" x 3 7/8" before using punch
• Herbal Infusion cardstock (non SU)
• Card layer measures 3 3/8" x 3 1/2"
• Cut panels (3 3/8" along top of trimmer) 1 1/8" x 3 1/2"
• Keep them in order
• Circle of Spring stamp set
• Wild Wasabi ink
• Botanical Builder Framelits
• Circle dies - 2 3/8" and 2 5/8" (non SU)
• Circle 1 1/4" and 1 3/8", Itty Bitty Accents and Scallop Edge Border hand punches
• Dimensionals
• Basic Pearl Jewels