I created a tutorial using a 3" x 3" piece of Stampin' Up! Mixed Media Florals Designer Series Paper. I am sharing the instructions with you.
Stampin' Up! Products
Dusty
Durango cardstock
Card base measures 5 1/2" x 8 1/2”
Scored at 4 1/4"
Basic
White cardstock
Card layer (inside) measures 5 1/4" x 4”
Scrap for sentiment
Mossy
Meadow cardstock
Card layer measures 3 1/8” x 3 1/8”
Strips measure 5 1/4” x 1/4" (cut three)
Mixed
Media Florals Designer Series Paper
Card layer measures 3” x 3”
Hey
You stamp set
Mossy Meadow ink
Tailored
Tag punch
Dimensionals
The easy tutorial is free; please FOLLOW each step. These steps must be followed completely. Any email request without following these steps will be discarded.
Post a comment on my blog. Comment link is at the end of this post or Share on Pinterest. Pinterest icon is at the bottom of this post.
EMAIL me asking for the Diagonal Strips Tutorial. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
You just purchased a new cling mount stamp set, if only you could create dies to fit those stamps. Well you can and I made it easy. I have added an update to the tutorial below. This update shows you how to create a complete die set for a new stamp set that has never been used and the sticker image labels have not been attached. My full tutorial including this AWESOME tip on making faux dies for an entire stamp set is available below. Now through Memorial Day, Monday, May 26, 2025 my tutorial is only $19.99.
I created dies to use for every stamp in the Spotlight on Nature stamp set from Stampin' Up!
ORIGINAL TUTORIAL
My Crafts by Beth Faux Die Tutorial is NOW Available. Click HERE for more information!
I've had my Brother ScanNCut for six years, making a sentiment layer was tedious. I learned the basics from YouTube videos. While creating this card, I had a lightbulb moment...I discovered a way to make sentiment layer and a sentiment mat for all my photopolymer stamps. And improved that one step by showing how to create files for my cling mount stamps. It took me over three days to create files for all my stamps, it was totally worth it. Previously it would take me up to two hours to create one file for stamping just one sentiment. Now I can do it in under ten minutes.
I have created a tutorial on how to create stamping layers and the "shadow" layer for the sentiment. If you know the basics to using your Brother ScanNCut and the Brother CanvasWorkspace you will be able to master my tutorial in minutes. If you decide to purchase my tutorial, you must need to understand how to scan and cut out an image using your machine. There are YouTube videos showing the basic steps for the beginner. To use this tutorial, again, you must know the basic steps in using your Brother ScanNCut and the Brother CanvasWorkspace software. I have never seen a video that creates sentiment and mat layers as easy as mine.
Stampin' Up! Products
Evening Evergreen cardstock
Card base measures 8 1/2" x 5 1/2"
Score at 4 1/4"
Card layer (inside) measures 5/8" x 5 1/4"
Basic Black cardstock
Glue to the back of the cluster of flowers for stability
Basic White cardstock
Card layer (inside) measures 4" x 5 1/4"
Scrap for sentiment
Fresh Freesia cardstock
Scrap for sentiment mat
Favored Flowers Designer Series Paper
Large cluster of flowers
Card layer measures 4" x 1 1/8"
Card layer (inside) measures 1/2" x 5 1/4"
Forever Lovely stamp set
Evening Evergreen ink
Fragrant Flowers die
White crochet thread
Pearl Basic Jewels
Dimensionals
Check out my affliliate link for the Brother ScanN Cut. No need to purchase dies, just scan and cut.
I created a Faux Die for the butterfly from the Paper Pumpkin Delicate Wings stamp set and it was so easy.The "die cut" for the butterfly was cut using my Brother ScanNCut and their free software CanvasWorkspace. It is so easy with my tutorial. You can create files to use for all your stamps, each stamp image can be made into a faux die in less than five minutes.
There are so many YouTube videos that show how to stamp an image and draw an outline of it, closing in the "opened" lines and cut with your machine. Sometimes you didn't get a perfect scanned image and you have to try again. Stamp ten butterflies and you have to outline and/or close the opened lines for EACH AND EVERY butterfly. With my tutorial, you can create a file, cut ten butterflies, stamp the "die cuts" and you are done!
With my Brother ScanNCut tutorial, why have a die where you stand over your die cutting machine, line up the image with the die and crank EACH AND EVERY butterfly. That takes a LONG TIME! And you have the battle of the die slipping over the stamped image as you are cranking it through and you have to stamp and die cut another butterfly. There goes one stamped image into the trash and your wasted time. Think of the money you'll save not purchasing dies! Most stamp sets only have three to four dies created for it, with my method you'll have a "die" for each stamp image. Keep in mind a die set may have a die that is unique, if that is the case, you may want to purchase the die set.
Oh my gosh....you can make faux dies for every Paper Pumpkin stamp set and every stamp set you own! You'll be the envy of every stamper!
I have created a tutorial on how to create stamping layers and the "shadow" layer for the sentiment. If you know the basics to using your Brother ScanNCut and the Brother CanvasWorkspace you will be able to master my tutorial in minutes. If you decide to purchase my tutorial, you must need to understand how to scan and cut out an image using your machine. There are YouTube videos showing the basic steps for the beginner. To use this tutorial, again, you must know the basic steps in using your Brother ScanNCut and the Brother CanvasWorkspace software. I have never seen a video that creates sentiment and mat layers as easy as mine.
This tutorial is FREE with a qualifying Stampin' Up! order from me. The tutorial is also available for purchase. More information can be found after the directions for this card.
Wildly Flowering Designer Series Paper - Diagonal Strips Card Layout
Stampin' Up! Products
Moody Mauve cardstock
Basic White cardstock
Early Espresso cardstock
Misty Moonlight cardstock
Wildly Flowering Designer Series Paper
Delicate Wings stamp set
Paper Pumpkin - April 2024
Expressions of Color stamp set
Paper Pumpkin - June 2021
Night of Navy ink
Crafts by Beth Faux die using Delicate Wings
Rhinestones
Dimensionals
Check out my affliliate link for the Brother ScanN Cut. No need to purchase dies, just scan and cut.
The tutorial cannot be copy and/or distributed. I spent three weeks creating and perfecting this tutorial. Thank you for understanding.
This tutorial is free with your $50 Stampin' Up! order placed with me using my Hostess Code. This tutorial is also available for $24.95. Click on the Buy Now button below.
Brilliant Wings, Circle, Spotlight on Nature and Sunflower dies
Pearl Basic Jewels
Dimensionals
* I used 1/8" graph paper and ended up having to trim the Basic White 5 1/8" x 3 7/8" to 5 1/16" x 3 7/8". I love using graph paper, very inexpensive way for lining up projects.
The diagram with measurements for the card is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Follow my blog
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the Five Strip Card Layout. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
* I created my own faux sentiment die cut and shadow using my Brother ScanNCut. Every stamp can be a die!
The card layout diagram with measurements for the card is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the Bookbinding Landscape. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
* I created my own faux sentiment die cut and shadow using my Brother ScanNCut. Every stamp can be a die!
The card layout diagram with measurements for the card is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Follow my blog
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the Split Gatefold Fun Fold. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
I created a new card layout and it uses a piece of Designer Series Paper that measures 6 1/2" x 5 1/2". How many pieces can you get from a piece 12" x 12"?
The answer will surprise you! - The answer is 4!
The 12" x 12" Magic diagram is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Follow my blog
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the 12" x 12" Magic Hack. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
How do I get my layering so precise on my sentiment layer? Simply glue you straight-lined diecut/punch onto cardstock and allow to dry. Line the ruler guide across the edge and use a box cutter for a perfect layer. I use a cutting mat to protect my surface. I use temporary adhesive to hold the die cut in place.
* I created my own faux sentiment die cut and shadow using my Brother ScanNCut. Every stamp can be a die!
The card layout diagram design is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the Window Pane Third Edition” . If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
My Crafts by Beth Faux Die Tutorial is NOW Available. Click HERE for more information!
I've had my Brother ScanNCut for six years, making a sentiment layer was tedious. I learned the basics from YouTube videos. While creating this card, I had a lightbulb moment...I discovered a way to make sentiment layer and a sentiment mat for all my photopolymer stamps. And improved that one step by showing how to create files for my cling mount stamps. It took me over three days to create files for all my stamps, it was totally worth it. Previously it would take me up to two hours to create one file for stamping just one sentiment. Now I can do it in under ten minutes.
I have created a tutorial on how to create stamping layers and the "shadow" layer for the sentiment. If you know the basics to using your Brother ScanNCut and the Brother CanvasWorkspace you will be able to master my tutorial in minutes. If you decide to purchase my tutorial, you must need to understand how to scan and cut out an image using your machine. There are YouTube videos showing the basic steps for the beginner. To use this tutorial, again, you must know the basic steps in using your Brother ScanNCut and the Brother CanvasWorkspace software. I have never seen a video that creates sentiment and mat layers as easy as mine.
Stampin' Up! Products
Evening Evergreen cardstock
Card base measures 8 1/2" x 5 1/2"
Score at 4 1/4"
Card layer (inside) measures 5/8" x 5 1/4"
Basic Black cardstock
Glue to the back of the cluster of flowers for stability
Basic White cardstock
Card layer (inside) measures 4" x 5 1/4"
Scrap for sentiment
Fresh Freesia cardstock
Scrap for sentiment mat
Favored Flowers Designer Series Paper
Large cluster of flowers
Card layer measures 4" x 1 1/8"
Card layer (inside) measures 1/2" x 5 1/4"
Forever Lovely stamp set
Evening Evergreen ink
Fragrant Flowers die
White crochet thread
Pearl Basic Jewels
Dimensionals
Check out my affliliate link for the Brother ScanN Cut. No need to purchase dies, just scan and cut.
I often see simple cards selling on Etsy, obviously there is a niche. This note card was quick and easy to make and in the process of making it - I figured out a way to quickly make the sentiment and sentiment mat layers using my Brother ScanNCut. I have spend nearly two weeks creating a tutorial that will be available FREE with your $50 Stampin' Up! product purchase from me using my Hostess Code. The tutorial will also be available for $9.99 once it is released. It is a Game Changer!!!
Stampin' Up! Products
Very Vanilla Note Cards*
I used Card base measures 4 7/8" x 7"
Scored at 3 1/2"
Evening Evergreen cardstock
Scrap for sentiment mat
Very Vanilla cardstock
Card layer measures 4 7/8" x 3 1/2"
Optional inside card layer would be 4 3/4" x 3 3/8"
* I created my own faux sentiment die cut and shadow using my Brother ScanNCut. Every stamp can be a die!
* I used the Delightfully Detailed Note Cards & Envelopes purchased in 2019. Once one layer or more is added to the card, they barely fit into the envelope. I trimmed the cards 4 7/8" instead of the premade width of 5"
I couldn't decide whether I should put a strip of Mossy Meadow behind the sentiment strip; this is the card made without the strip. I prefer the MM behind the sentiment strip.
The diagram with measurements* for the card is FREE, please FOLLOW each step. These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.
Post a comment on my blog. Comment link is at the end of this post.
EMAIL me asking for the Accordion Fun Fold.If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I CANNOT tie it back to an email address.
DO NOT POST YOUR EMAIL ADDRESS ON MY BLOG - Spam bots will find it.
*Diagram uses a different DSP and layout differs slightly. However, all the measurements for the different layer options are in this diagram.
.jpg)
