Use Up Your Stash Challenge - Card #1

... to make room for more Stampin' Up! Designer Series Paper.

Stampin' Up! Products

• Very Vanilla cardstock
• Card base measures 8 1/2" x 5 1/2"
• Score at 4 1/4
• Card base (behind DSP) measures 3" x 4 1/4"
• Card base (behind) DSP and last layer measures 3 1/8" x 4 3/16"
• Scrap for sentiment
• Crushed Curry cardstock
• Card layer (inside) measures 4" x 5 1/4"
• Scrap for sentiment mat
• Whole Lot of Lovey Designer Series Paper
• Card layer measures 3" x 4 1/16"
• Mark left side 1", 1 3/4" and 3 1/4"
• Mark right side 3/4", 2 1/4" and 3"
• Cut diagonally
• The top, bottom and sides are flush with the CC 3" x 4 1/4" cardstock
• Attach top and bottom pieces first for best results 
• Beyond the Horizon* and Dandelion Wishes stamp sets
• Paper Pumpkin - March 2022*
• Crushed Curry and Memento Tuxedo Black inks
• Tailored Tag punch
• Very Vanilla 1/8" ribbon taffeta
• Dimensionals

I created a Four Quadrilateral Layout Tutorial. Please note that I didn't use all the layers in the tutorial for this blog post. The diagram with measurements for the card is FREE, please FOLLOW each step.  These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.

1. Follow my blog
2. Post a comment on my blog. Comment link is at the end of this post.
3. EMAIL me asking for the Four-Quadrilateral Layout. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I do not have an email address. 

The Four-Quadrilateral Layout

Stampin' Up! Products

• Very Vanilla Thick cardstock
• 
  Card base measures 8 1/2" x 5 1/2"
• Scored at 4 1/4"
  
• Card layer (inside) measures 4" x 5 1/4"
• Scrap for sentiment
• Flirty Flamingo cardstock
• Card layer measures 4" x 5 1/4"
• Card layer measures 3 1/8" x 4 3/16"
• Card layer measures 3" x 4 1/4"
• DSP sections are attached to this piece
• Card layer (inside) measures 5/8" x 5 1/4"
• Scrap for flowers and sentiment mat
• Mossy Meadow cardstock
  
• Scrap for sprigs
• Daffodil Afternoon Designer Series Paper
• Card layer measures 3 7/8" x 5 1/8"
• Card layer measures 3" x 4 1/16"
• See diagram for cutting
• Card layer (inside) measures 1/2" x 5 1/4"
• Beyond the Horizon stamp set
• Paper Pumpkin March 2022
• Mossy Meadow ink
• Sentiment die (non SU)
• Itty Bitty Accents punch
• Sprig punch (non SU)
• Rhinestone dyed black
• Dimensionals

The diagram with measurements for the card is FREE, please FOLLOW each step.  These steps must be followed completely. Any email request without FIRST posting a comment on this blog post will be discarded.

1. Follow my blog
2. Post a comment on my blog. Comment link is at the end of this post.
3. EMAIL me asking for the Four-Quadrilateral Layout. If you post a "anonymous" comment on my blog you have to also state in the email that you commented. When you post anonymously I do not have an email address. 

Thinking of You Ladybug

If you like this card, check out my Hello Ladybug Tutorial HERE

 Stampin' Up! Products

• Basic White Thick cardstock
• Card base measures 4 1/4" x 11"
• Scored at 5 1/2"
• Card layer (inside) measures 4" x 5 1/4"
• Basic Black cardstock
• Scrap for ladybug
• 
  Real Red cardstock
• Card layer measures 4 1/4" x 3/8"
• Scrap for ladybug
• Botanical Prints Designer Series Paper
• Card layer measures 4 1/4" x 4 1/4"
  
• Card layer (inside) measures 1/2" x 5 1/4"
• Hello Ladybug and Beyond the Horizon* stamp sets
• Paper Pumpkin March 2022
• Memento Tuxedo Black and Old Olive inks
• Ladybug Builder punch
• Rhinestones
• Dimensionals

Gift Set

Harvest Meadow Designer Series Paper Tutorial - Card #4

Stampin' Up1 Products

• Misty Moonlight cardstock
• 
  Card base measures 8 1/2" x 5 1/2"
• Scored at 4 1/4"
• Card layer (inside) measures 5/8" x 5 1/4"
• Finished banner measures 2 3/4" x 1/2"
• Scrap for two flowers
• Basic White cardstock
• Card layer measures 3 5/8" x 4 7/8"
• Card layer (inside) measures 4" x 5 1/4"
• Finished banner measures 2 5/8" x 3/8"
• Scrap for sprig
• Harvest Meadow Designer Series Paper
• Card layer measures 1" x 4 3/4"
  
• Card layer measures 2 1/2" x 4 3/4"
• Card layer (inside) measures 1/2" x 5 1/4"
• Beyond the Horizon stamp set
• Paper Pumpkin - March 2022
• Misty Moonlight ink
• Banner Pick a Punch and Itty Bitty Accents punch
• Sprig punch (non SU)
• Pearl Basic Jewels

Quick and Easy Card - Four Examples Using One Stamp Set, One DSP and Same Card Layout

Stampin' Up! Products

• Petal Pink cardstock
• Card base measures 5 1/2" x 8 1/2"
• Scored at 4 1/4"
• Card layer measures 4 7/8" x 3 5/8"
• This is my step-up layer
• Scrap for sentiment
• Basic White cardstock
• Card layer (inside) measures 5 1/4" x 4"
• Poppy Parade cardstock

• Card layer measures 4 5/8" x 3 3/8"
• Card layer (inside) measures 5/8" x 4"
  
• Scrap for sentiment mat
• Flowering Fields Designer Series Paper
• Card layer measures 4 1/4" x 3 1/8"
• Cut three strips measuring 1 3/8" x 3 1/8"
• Card layer measures 1/2" x 4"
• Beyond the Horizon stamp set
• Paper Pumpkin March 2022
• Sentiment die (non SU)
• White crochet thread
• Rhinestones
• Dimensionals

* * * * * * * * *

Stampin' Up! Products - Card #2

• Highland Heather cardstock
• Card base measures 5 1/2" x 8 1/2"
• Scored at 4 1/4"
• Scrap for butterfly and sentiment
• 
  Basic White cardstock
• Card layer (inside) measures 5 1/4" x 4"
• Rich Razzleberry cardstock
• Card layer measures 4 5/8" x 3 3/8"
  
• Card layer (inside) measures 5/8" x 4"
• Scrap for butterfly and sentiment mat
• Flowering Fields Designer Series Paper
• Card layer measures 4 1/4" x 3 1/8"
• Cut strips each measuring 1 3/8" x 3 1/8"
• Card layer (inside) measures 1/2" x 4"
• Curly Cute stamp set
• Rich Razzleberry ink
• Brilliant Butterflies dies
• Sentiment die (non SU)
• Wink of Stella Clear
• Dimensionals

* * * * * * * * *

Stampin' Up! Products - Card #3

• Soft Succulent cardstock
• Card base measures 5 1/2" x 8 1/2"
• Scored at 4 1/4"
• Scrap for dragonfly
• Basic White cardstock
• Card layer (inside) measures 5 1/4" x 4"
• 
  Evening Evergreen cardstock
• Card layer measures 4 5/8" x 3 3/8"
• Card layer (inside) measures 5 1/4" x 5/8"
• Flowering Fields Designer Series Paper
  
• Card layer measures 4 1/4" x 3 1/8"
• Cut strips each measuring 1 3/8" x 3 1/8"
• Card layer (inside) measures 5 1/4" x 1/2"
• Dragonfly Garden and Express Yourself stamp sets
  
• Evening Evergreen ink
• Dragonflies and Pick a Banner punches
• Pearl Basic Jewels
• Dyed to match
• Dimensionals

* * * * * * * * *

Stampin' Up! Products

• Pear Pizzazz cardstock
• Card base measures 5 1/2" x 8 1/2"
• Scored at 4 1/4"
• Basic White cardstock
• Card layer (inside) measures 4" x 5 1/4"
• 
  Evening Evergreen cardstock
• Scrap for sprig
• Fresh Freesia cardstock
• Scrap for flowers
• Rich Razzleberry cardstock
• Card layer measures 3 3/8" x 4 5/8"
• Card layer (inside) measures 5/8" x 5 1/4"
• Flowering Fields Designer Series Paper
  
• Card layer measures 3 1/8" x 4 1/4"
• Cut strips measures 3 1/8" x 1 3/8"
• Card layer (inside) measures 1/2" x 5 1/4"
• Botanical Prints stamp set
• Rich Razzleberry ink
• Beautiful Trees dies (sentiment)
• Itty Bitty Accents Punch
• Sprig punch (non SU)
• Pearl Basic Jewels
• Dyed to match
• Dimensionals

I'm Finished!

... with my Boho Indigo Medley Designer Series Paper!

I finally finished creating cards with the Boho Indigo Designer Series Paper. If you have this paper in your stash and want to create cards and don't know where to start. My tutorial is still available for purchase. Click HERE for more details.

Stampin' Up! Products

• Misty Moonlight cardstock
• Card base measures 7 1/2" x 5 1/2"
• Scored at 4 1/4"
• Scrap for twig
• Night of Navy cardstock
• Card layer measures 3" x 5 1/4"
• Card layer measures 4" x 5 1/4"
• Scrap for sentiment mat and twig
• Very Vanilla cardstock
• Card layer (inside) measures 3 1/16" x 5 1/8"
• Card layer measures 2 3/8" x 1 1/8"
• Diecut using #8*
• Scrap for sprig
• Boho Indigo Medley Designer Series Paper
• Card layer measures 3 3/4" x 5 1/8"
• Cut one piece measuring 2 7/8" x 5 1/8"
• Remaining piece measures 7/8" x 5 1/8"
• Beyond Horizon stamp set
• Paper Pumpkin March 2022
• Boho Indigo and Stitched Rectangle dies
• Rhinestones
• Dimensionals

* Dies are numbered with the largest being #1

Hand Penned Gift Set and Matching Notebook

If you have the Hand Penned Designer Series Paper, you will love my tutorial. Click HERE for more information

Stampin' Up! Products

• Pool Party cardstock
• Card base measures 11" x 4 1/4" 
• S cored at 5 1/2"
• Basic White cardstock'
• 
  Card layer measures 2" x 3 1/4"
• Card layer (inside) measures 4" x 5 1/4"
• Misty Moonlight cardstock
• Card layer measures 4" x 5 1/4"
• Card layer (inside) measures 5/8" x 5 1/4"
• Scrap for butterflies (cut two)
• Hand Penned Designer Series Paper
  
• Card layers measure 7/8" x 2 15/16" (cut two)
• Card layers measure 7/8" x 4 3/16" (cut two)
• Card layer (inside) measures 1/2" x 5 1/4"
• Beyond the Horizon*, Celebrate Sunflowers, Dandelion Wishes and Hey You stamp sets
• *Paper Pumpkin - March 2018
• Misty Moonlight ink
• Brilliant Wings dies
• Pearl Basic Jewels
• Rhinestones
• Dimensionals
• Strip between two butterflies

Coordinating gift box and notebook. I used a smaller butterfly die for the notebook. The butterflies on the cards and box is too fragile for constant handling.

Note Card Series - Card #24

Stampin' Up! Products

• Basic White Thick cardstock
• Card base measures 4 7/8" x 3 3/4"
• Scored at 3 3/8"
• Basic Black cardstock
• Scrap for sentiment mat
• Delightful Dijon cardstock
• Scrap for sentiment
• Warmth & Cheer Designer Series Paper
• Card layer measures 4 7/8" x 3 3/8"
• Beyond the Horizon stamp set
• Paper Pumpkin March 2022
• Memento Tuxedo Black ink
• Sentiment die (non SU)
• Embroidery thread
• Dimensionals

What happens...

...When you find a card, but you are a layers-type card maker? You spend nearly three hours creating the layout and adjusting the sizes to perfectly (OCD) fit your desired card size. Then you share it to all your awesome blog followers!*

Stampin' Up! Products

• Basic White Thick cardstock
• Basic Black cardstock
• Old Olive cardstock
• Real Red cardstock
• Beautifully Penned, Botanical Prints, Everyday Chic, Night & Day, and Petal Passion Designer Series Paper
• Beyond the Horizon stamp set
• Paper Pumpkin - March 2022
• Memento Tuxedo Black ink
• Itty Bitty Accents punch
• Sprig punch (non SU)
• Rhinestone
• Dyed black with Sharpie

Acetate Gift Box

• Basic White cardstock
• Belly band measures 11" x 1 1/4"
• Scored at 2 5/8" 3 1/4", 7 7/8" and 8 1/2"
• Banner measures 2 1/8" x 1/2"
• Basic Black cardstock
• Belly band layer measures 4 3/8" x 1"
• Banner measures 2 1/4" x 5/8"
• Old Olive cardstock
• Scrap for sprig
• Real Red cardstock
• Scrap for flowers (punch two)
• Botanical Prints Designer Series Paper
• Belly band layer measures 4 1/4" x 7/8"
• I'll Bee Yours stamp set
• Paper Pumpkin - January 2020
• Memento Tuxedo Black ink
• Banner Pick a Punch and Itty Bitty Accents punches
• Sprig punch (non SU)
• Rhinestone
• Dyed black with Sharpie

Mini Composition Book

• Basic White Thick cardstock
• Front panel measures 2 3/4" x 4 3/4"
• Each notebook may vary in size (purposely made taller and wider)
• Wrap around panel measures 4 1/4" x 4 3/4"
• Each notebook may vary in size
• Score at 1 1/4" and 1 5/8"
• Trim off excess (purposely made taller)
• Basic Black cardstock
• Card layer measures 2 5/8" x 4 1/4"
• May vary
• Card layer measures 1" x 4 1/4"
• Old Olive cardstock
• Scrap for sprigs
• Real Red cardstock
• 
  Scrap for flowers
• Botanical Prints Designer Series Paper
• Card layer measures 2 1/2" x 4 1/8"
• May vary
• Card layer measures 7/8" x 4 1/8"
• Mini Composition book
• Itty Bitty Accents punch
• Sprig punch (non SU)
• Rhinestones
• Dyed with Sharpie
• Tear & Tape

Note Card Series - Card #17

Stampin' Up! Products

• Elegant Eggplant cardstock
• Card base measures 6 3/4" x 4 7/8"
• 
  Scored at 3 3/8"
• Card layer (inside) measures 3 1/8" x 1/2"
• Basic White cardstock
• Card layer measures 3 1/8" x 4 5/8" (cut two)
  
• Hues of Happiness Designer Series Paper
• Card layer measures 3 1/8" x 3 7/8"
• Mark down top left 2 3/4"
• Mark down top right 3/4"
• Cut diagonally
• Card layer (inside) measures 3 1/8" x 3/8"
• Beyond the Horizon stamp set
• Paper Pumpkin - March 2022
• Elegant Eggplant ink
• Brilliant Wings dies
• Rhinestones

If you want more Hues of Happiness Designer Series Paper ideas, click HERE.

Paper Pumpkin Beyond the Horizon Alternative #2

Stampin' Up! Products

• Beyond the Horizon Paper Pumpkin kit
• Card base
• Basic White cardstock
• Element from kit
• Old Olive cardstock
• Card layer measures 3 5/8" x 5"
• Die cut with #2 and #3 nested together *
• Scrap for circle behind embellishment is 1 7/8"
• Element from kit
• Pale Papaya cardstock
• Card layer measures 4" x 5 3/8"
• Die cut with #1 and #2 nested together * 
• Card strips behind frames to hold them together measures 1/4" wide **
• Die cut circle embellishment from kit
• New Horizons Designer Series Paper
• Strip measures 2 1/8" x 13/16" or
• Use envelope
• Celebration Time stamp set from kit
• Misty Moonlight ink
• Layering Circles and Stitched Rectangle dies
• Gems from kit
• Dimensionals

* Dies are numbered with the largest being #1. Keep die cut pieces and use them as a guide to attach frame to card

Paper Pumpkin Beyond the Horizon Alternative #1

Stampin' Up! Products

• Beyond the Horizon Paper Pumpkin kit
• Card base
• Basic White cardstock
• Sentiment die cut from kit
• Misty Moonlight cardstock
• Card layer measures  3 5/8" x 5"
• Die cut with #2 and #3 nested together * 
• Card strips behind frames to hold them together measures 1/4" wide **
• Old Olive cardstock
• Card layer measures 4" x 5 3/8" 
• Die cut with #1 and #2  nested together *
• Sentiment mat measures 1/2" x 2 1/2"
• Pink Pirouette cardstock
• Scrap for butterfly 
• Beauty of Friendship and Butterfly Gala stamp sets
• Misty Moonlight inks
• Beautiful Trees dies
• Butterfly Duet punch
• Gem from kit
• Dimensionals

Dies are numbered with the largest being #1. Keep die cut pieces and use them as a guide to attach frame to card

** I secured the back of the two frames with 1/4" sticky strip; removed the liner and placed 1/4" strips over the adhesive before attaching to card